Control common properties¶

It is enumerated the common property of controls.

Even if you set the value to some property depending on the control type, it may meaningless.

For more information, please look at the description of each control .

ID = Control ID¶

Define the control ID.

ID = 001_000_00010;

Note

If you don’t set the ID, it generates automatically from the hash value.

POSITION = X, Y ¶

Determine the display position. The base position changes according to the anchor in STYLE.
POSITION = 32,{50} + 64;
Coordinates can be specified as a percentage .

SIZE = width,height ¶

It changes the display size. If it is omitted , or , you specify 0 ,it gets the size from the texture parts.
SIZE = 64,32; //64x32
SIZE = ,32;   //Set the width of the texture part width
SIZE = 64;            //Set the height of the texture part height
SIZE = {50} - 25;
Size can be specified as a percentage .

CONTENTS = { control define … }¶

It defines contents int the control.

CONTENTS = {
      BUTTON(A) {
          :
      };
      CHECKBOX(B) {
          :
      };
      LISTBOX(C) {
          :
      };

CONTENTS_SIZE = width,height ¶

It defines the size of the content.
CONTENTS_SIZE = {50},64;
Contents size can be specified as a percentage .

LINE_SPACE = line spacing pixel value¶

It defines the gaps between the content.
LINE_SPACE = 8;       //Put an 8-dot space.
You cannot specify a percentage.

GROUP = Control ID,…¶

It defines the group in the control. It is also used when you want to associate a listbox and scrollbar.
GROUP = RADIO(Spring),RADIO(Summer),RADIO(Autumn),RADIO(Winter),001_002_30000;

PRIORITY = Priority value¶

It defines the priority value . The higher the value, it will appear on front.
PRIORITY = 3;

TEX_ID = Texture ID,Part ID¶

TEX_ID = Part ID¶

You set the texture ID and the part ID.

TEX_ID n = Texture ID,Part ID¶

TEX_ID n = Part ID¶

You set the texture ID and the part ID.

It can be set in the range of n = [1..7].

If n = 0, it operates the same texture as the TEX_ID.

TEXTURE_OFFSET n = offset X,offset Y ¶

Set the display offset of the badge.

It can be set in the range of n = [1..7].

Texture offset can be specified by a percentage .

Texture offset can be specified by a percentage .¶

You set the texture ID and the part ID.

It can be set in the range of n = [1..7].

When n = 0, it has the same meaning as SIZE.
TEXTURE_SIZE1 = 64,32;        //64x32
TEXTURE_SIZE2 = ,32;  //Set the width of the texture part width
TEXTURE_SIZE3 = 64;   //Set the height of the texture part height
Texture size can be specified by a percentage .

COLOR = R,G,B,A¶

Set the color.

Set R, G, B in the range of 0…2 .

If you set a value in excess of one , each color component can double the brightness.

Set A in the range of 0…1 .

COLOR n = R,G,B,A¶

Set the color.

Set R, G, B in the range of 0…2 .

If you set a value in excess of one , each color component can double the brightness.

Set A in the range of 0…1 .

It can be set in the range of n = [1..7].

If n = 0, it operates the same texture as COLOR .

CAPTION = Caption ID¶

Set the ID of the string .

Please refer to here .
CAPTION = 010_000_00100;

CAPTION = “string”¶

Set the string.
CAPTION = "Hellow world!";

CAPTION_COLOR = R,G,B,A¶

You can set the caption color .

Set a value in the range of 0…1.

CAPTION_OFFSET = X, Y ¶

It adjust the caption position.

Caption offset can be specified by a percentage .

SE_ID = SE_ID¶

To set the ID of the sound played when pressed . 0 is set as the default. This default value means not to play a sound.

STYLE = Flag0|Flag1|..|Flagn¶

You can set the display anchor of control.

Display position anchor flag	Description
ANCHOR_DEFAULT	Set the anchor position in the upper left Same as ANCHOR_LEFTTOP The default control center position is set to BASE_LEFT.
ANCHOR_LEFTTOP	Set the anchor position in the upper left The default control center position is set to BASE_LEFT.
ANCHOR_LEFT	Set the anchor position to the left. And vertical centering The default control center position is set to BASE_LEFT.
ANCHOR_LEFTBOTTOM	Set the anchor position to the left. Located along the lower edge The default control center position is set to BASE_LEFTBOTTOM.
ANCHOR_TOP	Set the anchor position to the upper side Centering at lateral. The default control center position is set to BASE_TOP.
ANCHOR_CENTER	Set the anchor position in the center of the window The default control center position is set to BASE_CENTER.
ANCHOR_BOTTOM	Set the anchor position at the bottom Centering at lateral. The default control center position is set to BASE_BOTTOM.
ANCHOR_RIGHTTOP	Set the anchor position in the upper right The default control center position is set to BASE_RIGHTBOTTOM.
ANCHOR_RIGHT	Set the anchor position to the right And vertical centering The default control center position is set to BASE_RIGHT.
ANCHOR_RIGHTBOTTOM	Set the anchor position to the right Located along the lower edge The default control center position is set to BASE_RIGHTBOTTOM.

You can set the center position of the control.

Base position change flag	Description
BASE_DEFAULT	It varies depending on the anchor flag . If you do not specifically set , this value is set . See the description of each anchor flag
BASE_LEFTTOP	Set the center position to the upper left side.
BASE_LEFT	Set the center position to the left side. and vertical centering.
BASE_LEFTBOTTOM	Set the center position to the bottom left side.
BASE_TOP	Set the center position to the upper side. and horizontal centering
BASE_CENTER	Set the center position to the center.
BASE_BOTTOM	Set the center position to the bottom side. And horizontal centering.
BASE_RIGHTTOP	Set the center position to the upper right side.
BASE_RIGHT	Set the center position to the right side. and horizontal centering
BASE_RIGHTBOTTOM	Set the center position to the bottom right side.

You set the caption position to the center.

Base position change flag can adjust the position of a button,a label,and bar.

But it cann’t adjust the position of TEXT , RICHTEXT or LOGTEXT .

Text anchor	Description
TEXT_CENTER	It aligns the text to the center.
TEXT_LEFT	It aligns the text to the left side.
TEXT_RIGHT	It aligns the text to the right side.

Change the font decoration of the caption .

You can change the font decoration of the caption .	Description
TEXT_NORMAL	No decoration
TEXT_BOLD	Bold type
TEXT_DENT	Dent type
TEXT_SHADOW	Shadow Type

Style that limits the function as follows .

Function limit style	Description
HIDE	Hide.
DRAG	Enable a dragging.
DISABLE	It is not able to pressing the control. And the control color darken.
NOHIT	It is not able to pressing the control.
HIT	It is able to pressing the control.